BitFenix ​​Introduces Prodigy M housing

Aug

15

2013

The Taiwanese BitFenix ​​has a larger version of its Prodigy housing introduced. The Prodigy M can handle mATX motherboards, but is as wide and deep as the original Prodigy housing.

Where the original Prodigy housing is suitable for motherboards in the MITX-format, with the BitFenix ​​Prodigy M released a housing which is also suitable for mATX motherboards. The housing is slightly higher by 404mm than the MITX-Prodigy, but with 250mm and 359mm as wide and deep. Under the mATX or MITX motherboard can be a standard ATX power supply built. There is room for an external accessible 5.25 “drive, internally a drivebay for two 3.5” drives or three 2.5 “drives available on the bottom plate may further two 3.5.” – Or two , will be 5 ‘drives confirmed.

The processor can be cooled by a cooler with a maximum height of 160mm, but also thin with water cooling radiators 120mm or 240mm can be built. In total, five 120mm fans installed. On the outside, the Prodigy M FyberFlex with composite handles and a rubbery finish. Two USB 3.0 ports, audio ports and power buttons mounted on the side. Both the front and the top is a removable grille fitted.

Viewing:-252

Tags:

In: Technology & Gadgets Asked By: [17589 Red Star Level]

Answer this Question

You must be Logged In to post an Answer.

Not a member yet? Sign Up Now »