Nikon D800/D800E A 1:10, B 1:10




Nikon logo (60 pix) Nikon has for its D800 and D800E new firmware SLRs 1.10 as version number. The firmware can be put on the camera. From an OS X or Windows machine These cameras have an FX-format CMOS image sensor with 36.3 megapixels on board and can be fitted with interchangeable lenses. The list of changes in this release is large and both cameras alike.

Changes in this version

Custom Setting f13 has changed assign Movie Record button.
Because personal setting f13 has changed assign Movie Record button, AF-ON MB-D12 now assign personal setting f14.
Custom Setting f15: Assign Fn button of the remote control has been added.
The following features have been added or changed names when the D800 is used with communication unit UT-1 with firmware version 2.0. In the setup menu is added to the network (UT-1) option and the name of the optional Wireless Transmitter changed Wireless Transmitter (WT-4).
Feature that has been added:
– Stand HTTP server
Use this mode to view or to make from a web browser on a computer or iPhone. Photographs of the photos on the memory card in the camera
Features that have changed their names:
– Stand FTP upload (formerly Transfer Mode (FTP))
Use this mode for uploading to an FTP server of photos and movies from memory cards in the camera or photos right after you take them.
– Image transfer mode (formerly Transfer Mode (PC))
Use this mode for uploading to a computer, pictures and movies from memory cards in the camera or photos right after you take them.
– Stand Camera Controls (formerly PC mode)
Use this mode to be controlled from a computer using Camera Control Pro 2 (available separately) to the camera and photos and movies directly to save to your computer.
To enable support for these functions, you may need to update the firmware of communication unit UT-1 update to version 2.0 or later, and you need to Wireless Transmitter Utility update to version 1.5.0 or later. When the update the camera firmware is executed, network profiles with earlier firmware versions specified can not be used. You must create the network profiles again.
Support for firmware update version of communication unit UT-1 was added.
Support for CompactFlash memory cards with a capacity of more than 128 GB is added.
When Al borrowing AF-ON was selected for Custom Setting a4 (AF activation) and the AF-ON button is pressed to start during shooting through the viewfinder, autofocus remained the focus even after the user enters his or her finger from the Button had taken was locked and the shutter at any time. The specifications have been modified so that the shutter can not relax if the camera does not focus. Under the following conditions
– AF mode is set to AF-S (single-servo AF)
– AF-area mode set to Single-point AF
– Custom Setting a2 (AF-S priority selection) is set to Focus
When values ​​for 12 or 18 lenses were saved by AF fine tuning> Stored value in the setup menu, were only some lenses which were stored values ​​displayed reflect. Stored values ​​below This problem is resolved.
When the selector live image was set to live view photography while (assign Shutter) Custom Setting g4 was set to record movies, no value could be measured for the manual preset white balance. This problem is resolved.
When the flash was set to Commander mode, external flashes sometimes not. Flashed This problem is resolved.
In rare cases, the access lamp for the memory stayed longer than usual to burn and it took some time before operations could be carried out. This problem is resolved.

The following downloads are available:
* Nikon D800 for Windows
* Nikon D800 for OS X
* Nikon D800E for Windows
* Nikon D800E for OS X

Nikon D800E


In: Technology & Gadgets Asked By: [15554 Red Star Level]

Answer this Question

You must be Logged In to post an Answer.

Not a member yet? Sign Up Now »