Find a Question:
PassMark BurnInTest 8.0 build 1006
Passmark Burnintest logo (75 pix) PassMark Software has released an update for version 8.0 of BurnInTest. This program sets the various components of the computer a lot at work so as to try. The reliability and stability of the system The software is available in both standard and professional edition, and both can be downloaded. Both 32bit and 64bit version The professional edition provides additional test options for tape drives and parallel, serial and USB ports. In addition, the memory tests in the Pro version elaborate. More information about the differences is here to be found. Since build 1000, the following changes and improvements:
Version 8.0 build 1006
Some additional system information added for Intel Broadwell CPUs and the next generation of Intel Xeon Processor Family based on Haswell.
Corrected a bug where a scripted test That turns on Automatic temperature monitoring, May not turn on temperature monitoring.
Added a new option for the disk test (command line parameter “-ADR”) usefull to automatically select removable disk volumes (and not just automatically select fixed disk volumes).
Added a new command line parameter -Hx, that will set the screen resolution to 1024x768x32 and exit immediately.
The “Activity event” has been renamed to “Summary results written to log file” to be more meaningful.
The memory test now leaves a little more memory headroom if the disk test is running.
Minor changes to help.
Version 8.0 build 1005
Corrected a possible crash on exiting BurnInTest if the GPGPU test had run leg.
Corrected a possible crash with level 2 trace file logging of the event logs, where the Windows system or application event log is very large.
A possible scenario where Intel CPU Temperatures were sometimes not Collected leg has corrected.
Minor debug logging changes.
Version 8.0 build 1004
A new Pre-test option has added leg, Detect and turn off hardware tests. When selected BurnInTest will detect current hardware and if the hardware is not found on the system, then the test is turned off (see help).
A new option to automatically select all physical disks under WinPE has leg added, “-PHYSDISK.” Note: this test will destroy all data on all of the disks.
Temperature monitoring is now turned on by default.
Corrected a memory leak occurred That When The Window System information was updated (resized or scrolled).
If the system has run out of memory, and the disk test is unable to create a test data buffer, the disk test is now stopped.
Fixed a bug where (1) BurnInTest did not exit Properly When The Disk self test was run and (2) the GPGPU test did not workWhen run with the disk self test.
Fixed a bug where BurnInTest could crash on creating a 2nd Certificate Customer log file.
Fixed a bug where BurnInTest could crash on the GPGPU test encountering an error zoals out of memory.
Fixed a bug where BurnInTest could crash on start-up When collecting memory SPD data.
Fixed a bug where BurnInTest could crash on exiting.
Fixed a bug where if there were no optical drives on the system, then an error was displayed in Auto select Preferences When optical drives was selected.
When a larger number of tests are run, the memory test will now leave a little more memory headroom.
An error is now displayed on starting a non-scripted test if the test is selected Plugin Plugin but no files are specified.
Added a check for AMD Power Express When searching for video cards to try and Correctly detect AMD graphics cards in laptops with a dual setup with an Intel onboard card.
Added System information for AMD R5 M230, M255 R5, R7 M260, M265 R7, R9 M275X, M265X R9, R9 and R9 M270X M290.
The “Check Updates” option in the PC Test kit build now includes information specific to updating the PC Test Kit.
Minor debug logging changes.
Minor changes to help.
Version 8.0 build 1003
When BurnInTest is run in the preferences editor mode, all relevant test modes are now shown for physical disks.
Added DVD burn error message text (not just the error code).
Changes to only flush duplicate events if configured to Summarize duplicates.
Increased 3D test debug logging.
Correction for Reported BurnInTest crash on exit.
Additional debugging for the Video Playback test.
Minor updates to help.
Version 8.0 build 1001
It was possible the Webcam That test could fail on the first test, this leg has corrected.
Corrected the Disk serial number in reports (was shown as NA).
It was possible That Intel GPU temperature sources were Incorrectly Reported client happens they ‘are not supported. Intel GPU Temperatures are now not reported.
If the Temperature preferences are not changed and “Cancel” is selected, the current temperature sensor data is now retained (not reset).
AMD Radeon 295X2 R9 and R7 260 video cards have been added to System Information.
System Information Memory SPD improvements:
Added support for Haswell-E SMBus (for DDR4)
Added support for nForce MCP79 SMBus secondary
Added DDR4 SPD decoding
Fixed SPD decoding of manufacture information
Added DDR3 module type specifies decoding
The price for BurnInTest Standard leg has corrected.
Improvements to help.
The following downloads are available:
* PassMark BurnInTest 8.0 build 1006 – Standard (32bit)
* PassMark BurnInTest 8.0 build 1006 – Standard (64bit)
* PassMark BurnInTest 8.0 build 1006 – Professional (32bit)
* PassMark BurnInTest 8.0 build 1006 – Professional (64bit)
Answer this Question
You must be Logged In to post an Answer.
Not a member yet? Sign Up Now »
Star Points Scale
Earn points for Asking and Answering Questions!