Replacing the matrix Retina MacBook Pro

Jun

23

2013

Replacing the matrix Retina MacBook Pro

MacBook Pro
Repair

Retina MacBook Pro

This material was prepared in conjunction with the service center MacPlus. In it, we want to tell you about the most difficult changing the matrix, which experts of the center have ever seen. Some have guessed that we are talking about the MacBook Pro Retina 15 “. Replacing the matrix is ​​not provided by the manufacturer, but MacPlus learned to do it. This approach reduces the cost of good repair broken screens MacBook Pro Retina. Now we will explain how the process of change. Method is a little barbaric, so please do not read the article lovers statements “Krivorukov Wizard,” “so why get involved in Apple technology”, etc.

So, pass the word to professionals.

We need to parse:
Tweezers
Phillips screwdriver
Torx T6
Blade
Plastic plate (flexible, but tough).

Matrix, we have removed in advance, it is not difficult to do.

Take the tweezers and extract the metal from the plastic protection cap. Do this for both sides.

Замена матрицы Retina MacBook Pro

Move the plastic protecting the right (if the matrix is ​​mounted to you). It is worth the small effort.

Замена матрицы Retina MacBook Pro

Raise the plastic protection upwards.

Замена матрицы Retina MacBook Pro

Tweezers to peel off the tape, hiding behind a trail connection matrix.

Замена матрицы Retina MacBook Pro

Unscrew the 7 screws holding the antenna Wi-fi

Замена матрицы Retina MacBook Pro

and moves it.

Замена матрицы Retina MacBook Pro

Disconnect the loop matrix.

Замена матрицы Retina MacBook Pro

Unscrew the screws holding the mounting loop matrix. Unscrew the screws similar to the other side.

Замена матрицы Retina MacBook Pro

Disconnect the ribbon cable lighting.

Замена матрицы Retina MacBook Pro

Unscrew the screws holding the board on the cover of the matrix.

Замена матрицы Retina MacBook Pro

Turn down board and unscrew the screws underneath.

Замена матрицы Retina MacBook Pro

Turn off the hinges on both sides.

Замена матрицы Retina MacBook Pro

Poddevaem blade rubber gasket around the perimeter, unstick it from the matrix and the back cover. Do not worry about that scratch the matrix – it will still throw.

Замена матрицы Retina MacBook Pro

Carefully disconnect the gum away from the cover.

Замена матрицы Retina MacBook Pro

In the two lower corners unscrew the screws that hold the matrix.

Замена матрицы Retina MacBook Pro

Plastic plate poddevaem matrix and unstick it from the body on the perimeter.

Замена матрицы Retina MacBook Pro

Disconnect from the matrix of the cover.

Замена матрицы Retina MacBook Pro

Remove the cover from the remnants of adhesive tape around the perimeter. It is necessary to remove all the leftovers, otherwise then be very difficult to establish a new matrix correctly.

Замена матрицы Retina MacBook Pro

Double-sided adhesive tape pasted over the cover of the matrix on the perimeter.

Замена матрицы Retina MacBook Pro

With a sharp knife remove the unnecessary parts of the tape. Again, you need to remove all the excess to properly install the new matrix.

Замена матрицы Retina MacBook Pro

Unstick from the old matrix metal mount.

Замена матрицы Retina MacBook Pro

Clean off with all the remnants of mounting tape.

Замена матрицы Retina MacBook Pro

Apply the double sided tape on the plate in place of the old. Fasten the plate to the cover.

Замена матрицы Retina MacBook Pro

Dokleivaem tape around the perimeter.

Замена матрицы Retina MacBook Pro

Take the new matrix. Peel off the top with duct tape (just leave a sticky layer).

Замена матрицы Retina MacBook Pro

Set matrix in place. Make sure to leave the same clearances on all sides for proper installation of gum.

Замена матрицы Retina MacBook Pro

Insert the elastic in place.

Замена матрицы Retina MacBook Pro

Fasten the plate to the cover. In these places for the convenience of plot the double sided tape. Glue the second part of the board and fasten the second part to the body of the matrix.

Замена матрицы Retina MacBook Pro

Putting it all in reverse. It is necessary to position the wires as shown in the following figure:

Замена матрицы Retina MacBook Pro

Set in place a matrix and are happy outcome.

Замена матрицы Retina MacBook Pro

We do not recommend that you change the array itself as the first time properly align the matrix did not work even in our craftsmen. Now they got the hand and can provide you with professional assistance in replacing the matrix on the MacBook Pro Retina.

Viewing:-169

Tags:

In: Technology & Gadgets Asked By: [17591 Red Star Level]

Answer this Question

You must be Logged In to post an Answer.

Not a member yet? Sign Up Now »