Software update: Cura 3.6.0




Cura was developed by Ultimaker to make 3D printing as easy and streamlined as possible. Cura contains everything you need to print a 3D file. It works with all Ultimaker printers, but also with RepRap and Printrbot. Cura is easy to install and contains both the latest firmware and the calibration files for the 3D printer. Version 3.6 has been released and the changelog for this release can be found below.

Slicing engine improvements
Print core CC Red 0.6. The new CC 0.6 print core is selectable when the Ultimaker S5 profile is active. This print core is optimized for use with abrasive materials and composites.
Gyroid infill. New infill pattern with enhanced strength properties. Gyroid infill is one of the strongest infill types for a given weight, has isotropic properties, and prints. Note: Slicing time can be up to 40 seconds or more, depending on the model. Contributed by smartavionics.
Support brim. New setting that integrates the first layer of support material with the brim’s geometry. This significantly improves adhesion when printing with support material. Contributed by BagelOrb.
Cooling fan number. It is now possible to specify the cooling fan to use if your printer has multiple fans. This is implemented under Machine settings in the Extruder tab. Contributed by smartavionics.
Settings refactor. The CuraEngine has been refactored to create a more testable, future-proof way of failure and representing settings. This makes slicing faster, and future development easier.
User experience
Marketplace. The Toolbox has been renamed to the “Marketplace”.
Materials in the Marketplace. A new tab has been added to the Marketplace that includes downloadable material profiles, enabling users to quickly and easily prepare models for a range of third-party materials.
Filename and layer display. Added M117 commands to GCODE to give real-time information about the print job file name and layer number shown on the printer’s display when printing via USB. Contributed by adecastilho.
Firmware checker / Ultimaker S5. The update checker code has been improved and tested for reliable firmware update notifications in Ultimaker Cura. The Ultimaker S5 is now included.
Fullscreen fashion shortcuts. Fullscreen mode can be toggled using the View menu or with the keyboard shortcuts: Command + Control + F (macOS), or F11 (Windows and Linux). Contributed by KangDroid.
Configuration error message. In previous versions, Ultimaker Cura would display an error dialog when something happened to user configuration files, including the option to reset to factory defaults. This would not be about the current printer and print profile settings, so this information has been added.
Third-party printers
New third-party definitions. New profiles added for Anycube 4MAx and Tizyx K25. Contributed by jscurtu and ValentinPitre respectively.
Improved definitions for Ender-3. The Ender-3 build plate size has been adjusted to the correct size of 235 x 235 mm, corrected the start-up sequence, and the printhead has been adjusted when prints are purged or completed. Contributed by stelgenhof.
Bug fixes
Highlight active material. The active material is highlighted in Ultimaker Cura’s material manager list. This behavior is now consistent with the profile and machine manager.
Filament diameter behavior. The option to use 1.75 mm diameter filament with third-party 3D printers is now fixed and does not return to 2.85 mm. This fix also applies the appropriate Z-axis speed change for 1.75 mm filament printers. Contributed by kaleidoscopeit.
OSX compatibility. A fix was created to handle Mac OS version 10.10, but due to the QT upgrade, users with older versions will not be able to run Ultimaker Cura on their system without a system update. This applies to OSX version 10.09 and 10.08.
Monitor page memory leak. Fixed a memory leak when leaving the “Monitor” page open.
Fix polygon connector. Added performance improvements to the PolygonConnector to connect polygons that are close to each other. This also reduces the collide with previously printed things. Contributed by BagelOrb.
GCODE reader retractions. Fixed a bug where the GCODE reader did not show retractions.
Fix flooding in USB printing. No longer floods the printer with M105 temperature change requests after sending the printer. Contributed by fieldOfView.
Fix manage visible settings. Fix the behavior of the “manage visible settings” button, when pressing the “cog” icon of a particular category. Contributed by fieldOfView.
Add pause-at-height script for RepRap flavor. Add a new mail processing script that will print at a high level with RepRap printers. Contributed by Kriechi.
Fix updating temperature while preheating bed or extruder. Fixes updates to the print monitor while while preheating. Contributed by fieldOfView.
Add mesh names to slicing message. Added comment generation to indicate what the CODE after this comment is constructing. Contributed by paukstelis.
Material cost. Fixed a bug where material costs are not shown unless weight has changed.
TreeSupport CuraEngine crash. Fixed bugs crashing the CuraEngine when TreeSupport is enabled.
UM2 + firmware update. Fixed a bug where Ultimaker Cura would upload the wrong firmware after switching printers in the UI.
Layer view display. Fixed a bug where the layer view was missing if the first layer was empty.
Combing endpoints. Fixed a bug where erroneous combing movements were taking place.
Initial layer temperature not set correctly. Fixed a bug where the initial layer temperature is set correctly for the first object but then never again.
fx reset. Fixed a bug where clicking the fx icon did not respond when clicked.
Cura screenshot 3.3.1 (620 pix)

Version number 3.6.0
Release status Final
Operating systems Windows 7, Linux, macOS, Windows 8, Windows 10
License type GPL


In: A Technology & Gadgets Asked By: [23633 Red Star Level]

Answer this Question

You must be Logged In to post an Answer.

Not a member yet? Sign Up Now »